jglasserbell
New member
Weird problem that developed as of a couple of days ago, and I’ve got no idea as to what could have caused it. One of my submaster modules, (currently in the fourth slot) will not accept signal from any of the channel strips. Going direct into the module via “tape in” and selecting “tape” on the module works fine, as does the echo receive (aux return).
I’ve swapped the modules around, and the issue follows the card, so no issue with the rest of the console, and user error has been ruled out.
Checked for toasted resistors, bad connections, and I couldn’t find anything at all. Is there something I’m overlooking? I can faintly hear audio being passed, and the “mon gain” and fader controls are working, but only if I crank my headphones.
I’ve swapped the modules around, and the issue follows the card, so no issue with the rest of the console, and user error has been ruled out.
Checked for toasted resistors, bad connections, and I couldn’t find anything at all. Is there something I’m overlooking? I can faintly hear audio being passed, and the “mon gain” and fader controls are working, but only if I crank my headphones.