Tascam 388 Low playback/remix volume

[RFR]

So, i took the back off and just made sure the pcbs were all tight, put it back together and wolaaa, working fine now!

Did you pull and reseat them? Your 'fix' is a bit vague as to what you actually did..

Let's hope whatever you did was indeed the cure.

 

[jimmy1007]

Yeah, so i pulled and reseated, i think the corresponding pcb felt a little loose.

Now i'm having another issue:
Bounced track 5 and 6 onto track 7, then when listening back through the monitor section its there and sounding fine, however as soon as i switch to remix and mix with the l/r switches down, i have no recorded signal coming through the newly bounced track. Not even a whisper, Strange..

Any ideas Anyone?

Thanks for your time.

Jimmy

 

[sweetbeats]

What happens if you plug a mic into any channel and assign the mic to the L-R buss...can you hear it in the headphones (with STEREO selected as the headphone source) or at the monitor jacks or stereo out jacks?

And this is all assuming the mic trim is up, channel fader is up, stereo master fader is up and headphone level is up.