AllenM
Member
Hello,
Im trying to use this Tascam PB 32 H (1/4" in front and RCA in back) with my Ramsa mixer GROUP OUTS and DIRECT OUTS (Channels 1-16).
My ramsa wrt 820 uses RCA group outs and direct outs.
I need to have the TOP row of Tascam connected to Ramsa's 16 channels of Direct Outs and the BOTTOM row connected to Group Outs.
The problem is I'm not sure how to set the pb32H patchbay to where TOP and BOTTOM rows are not connected. Its connected right now as half normal, I believe.
The reason why I wanted the pb32H is because it uses 1/4" in front and rca in back.
Here is the manual
http://madamebutterface.com/assets/documents/Tascam%20PB-32%20Owners%20Manual.pdf
On page 11, there is a diagram #3 that I think would work. Not sure how to set it up that way.
Im trying to use this Tascam PB 32 H (1/4" in front and RCA in back) with my Ramsa mixer GROUP OUTS and DIRECT OUTS (Channels 1-16).
My ramsa wrt 820 uses RCA group outs and direct outs.
I need to have the TOP row of Tascam connected to Ramsa's 16 channels of Direct Outs and the BOTTOM row connected to Group Outs.
The problem is I'm not sure how to set the pb32H patchbay to where TOP and BOTTOM rows are not connected. Its connected right now as half normal, I believe.
The reason why I wanted the pb32H is because it uses 1/4" in front and rca in back.
Here is the manual
http://madamebutterface.com/assets/documents/Tascam%20PB-32%20Owners%20Manual.pdf
On page 11, there is a diagram #3 that I think would work. Not sure how to set it up that way.