Hey guys. I recently picked up a Lexicon MX 200 and I noticed that the right channel has a terrible buzz. The left channel is fine. Anyone else have this problem or know of a possible fix?
Lexicon MX 200 buzz
- Thread starter jonesey
- Start date
miroslav
Cosmic Cowboy
1.) Check you cables...at both ends.
Reverse the cables on the inouts and outputs and see if the buzz folllows the cables.
2.) Remove the inputs, and just plug the Lex's outputs into different destination inputs with different cables and see if it chages or goes away.
Do a little investigation...it may not be the actual unit and it could just be a ground wire issue on one side.
Reverse the cables on the inouts and outputs and see if the buzz folllows the cables.
2.) Remove the inputs, and just plug the Lex's outputs into different destination inputs with different cables and see if it chages or goes away.
Do a little investigation...it may not be the actual unit and it could just be a ground wire issue on one side.