Hi,
I have two questions which I cannot find an answer for here. Apologies if there are existing threads which I have missed which discuss these questions.
I have the Jamman Looper / Phrase Sampler (the model with two footswitches, which was discontinued when Digitech introduced the four footswitch ML2 JamMan Stereo Looper and Phrase Sampler Guitar Effects Pedal model).
I want to use the Jamman with my old Roland Cube 30 1 x 12 combo amp, and am trying to solve what I am sure is or was a dilemma and wish for others.
I would like to be able to:
1. Create a loop, containing effects, on the Jamman
2. And I would then like to be able to play the loop back through the amp while simultaneously playing my guitar through the amp, but being able to treat the guitar with either effects pedals or effects on the amp, without affecting the sonic nature of the playback from what has been recorded on the Jamman
So, here are my questions about this:
1. Obviously, I could create a loop on the Jamman by making it the last in a chain of pedals, meaning that the pedals
put before it would dictate the sound(s) which end up on the Jamman.
But, could I record the amp’s effects onto the Jamman by taking an out from the ‘Recording Out / Phones’ output, and going into the Jamman?
2. I suspect that this is not possible, given that the Cube 30 only has 1 channel (and 1 speaker), but is it possible to
use either the ‘Aux In’or ‘Recording Out / Phones’ on the amp in some way to make it possible to play back the
Jamman’s loops, and to simultaneously play the guitar through the amp using the settings on the amp (or using
pedals), making sure that the Jamman and guitar sounds remain separate from each other?
Thanks in advance to anyone answering this post.
gvdv
I have two questions which I cannot find an answer for here. Apologies if there are existing threads which I have missed which discuss these questions.
I have the Jamman Looper / Phrase Sampler (the model with two footswitches, which was discontinued when Digitech introduced the four footswitch ML2 JamMan Stereo Looper and Phrase Sampler Guitar Effects Pedal model).
I want to use the Jamman with my old Roland Cube 30 1 x 12 combo amp, and am trying to solve what I am sure is or was a dilemma and wish for others.
I would like to be able to:
1. Create a loop, containing effects, on the Jamman
2. And I would then like to be able to play the loop back through the amp while simultaneously playing my guitar through the amp, but being able to treat the guitar with either effects pedals or effects on the amp, without affecting the sonic nature of the playback from what has been recorded on the Jamman
So, here are my questions about this:
1. Obviously, I could create a loop on the Jamman by making it the last in a chain of pedals, meaning that the pedals
put before it would dictate the sound(s) which end up on the Jamman.
But, could I record the amp’s effects onto the Jamman by taking an out from the ‘Recording Out / Phones’ output, and going into the Jamman?
2. I suspect that this is not possible, given that the Cube 30 only has 1 channel (and 1 speaker), but is it possible to
use either the ‘Aux In’or ‘Recording Out / Phones’ on the amp in some way to make it possible to play back the
Jamman’s loops, and to simultaneously play the guitar through the amp using the settings on the amp (or using
pedals), making sure that the Jamman and guitar sounds remain separate from each other?
Thanks in advance to anyone answering this post.
gvdv