*edit*'
okay so what i did was i took the ground wire going from the output, and the ground wire that goes to the back of the guitar (hooked to the trem spring things) and i pigtailed them together, and soldered them to the top of my volume pot...then i hooked up my humbucker to that volume pot, and the ground and green wire (i think thtas the colors, im not looking right now, its
a seymour duncan sh4) are grounded to the top of that vol pot too..okay then i have a wire going from the middle lil solder point on that volume to a point on the switch..now, the next part is i have the yellow wire coming from my neck pickup hooked to the OTHER volume pot, and it's black wire (ground) is hooked to the top of THAT volume pot...then, i have a wire going from the volume pot to the switch...but, there seems to be a little ground point on the switch, so i hooked a wire from there to the top of the NECk volume pot..then, i just took the input white wire and hooked that to the middle solder point on the switch...but that buzz is sitll there, and everytime I get closer to the white wire, or touch it, it gets louder...but the buzz goes completley away if like i take that tester, touch one thing to the bridge, and the other to the white output wire....every noise goes away though...hmm, i hope someone can help because this isn't good at all since i need this guitar as my backup for my band..
and juststartingout, im not sure exactly what an OHM meter is, but I have a meter that's got like a positve (red) and negative (black) lil things that you can like check batteries and stuff, but theres a setting for OHM, but there's 3 different kinds..but i'm not sure exactly how to check though
*EDIT*
okay heres what happened..i checked all this out, and realized the humbucker WAS on and the buzz must just be my lights and stuff..so okay it works, but there is still a buzz..but now when i turn the volume down, it all goes away so that wokrs....BUT, my other single coil neck is a lot noiser bc its single coil, but even when I turn my volume DOWN on that pot, there is STILl a really annoying noise! whats going on here?
*edit 2*
thank you to everbody who helped, but I managed to pull through and wired everything up how i wanted and now it works beautifully :-D